Gift Selection Tetra Pond Debris Handling Pump

The Tetra Pond Debris-Handling Pump provides clog-free performance for pond filters, waterfalls or streams. It features a pre-filter cage that helps prevent leaves, sticks and other large debris from entering the unit, and also protects fish from the pump’s impeller. This powerful, energy-efficient pump is engineered for continuous operation and can handle debris up to 0.25 inches in diameter—allowing you to clean your pond, not your pump! This pump is ideal for ponds up to 3,000 gallons with a max flow of 3,149 gallons per hour and a max pumping height of 11.6 feet. Great ponds start with Tetra products!

HAZARDS TO HUMANS AND ANIMALS: To avoid possible electric shock, special care should be taken since water is employed in the use of this equipment. Do not operate any appliance if it has a damaged cord or plug, if it is malfunctioning, or if it is dropped or damaged in any manner. Always unplug an appliance from an outlet when not in use, before putting on or taking off parts, and before cleaning. Grasp the plug and pull to disconnect; never yank the plug. Use only extension cords that are intended for outdoor use. This plug is supplied with a grounding conductor and grounding type attachment plug. To reduce the risk of electric shock, be certain that it is connected to a grounding type receptacle. Never run the pump unless it is completely submerged. Do not run the pump without the pre-filter cage and ball nozzle in place. Always disconnect the unit from the main electricity supply before carrying out any maintenance. Do not allow the pump to become iced up. Do not expose the pump to direct sunlight for a long period of time. Do not use in salt water or highly chlorinated water. These pumps must not be used in swimming pools or areas where people are in contact with the water. Do not use an appliance for other than its intended use. Do not allow children to handle this equipment. This equipment should be kept away from children.